Advertisement
Label
Pattern Grid
Feedback
Pan
Level
Filter Low/High Cut
3.8.27 Phaser
The P
adds a swirling and animated effect to the signal. It is somewhat
HaSer
similar to the F
, but generally warmer sounding and without the
langer
metallic aspects. It works by delaying the input signal by a minuscule
amount and mixing it with the original. This leads to slight differences in
the phase between input and effects signal.
Sets one delay tap per track. The delay tap will sound at that position on
the time grid.
Sets the feedback level for the taps individually or on a global level.
Controls the individual positions of the taps in the stereo-field from com-
pletely left (-100%) to completely right (+100%).
Sets the output level for each tap individually.
Sets the cutoff frequency of the low pass/high pass filters that modify the
delayed signal. Frequencies below/above are attenuated with a slope of 12
dB per octave.
Function
Range
Unit
-60..0
dB
-100..+100
%
-60..0
dB
10..5000/
Hz
100..25000
KORE 2 – 17
Advertisement
