Download Print this page

Native Instruments O Kore 2 Operation Manual page 182

Advertisement

Label
Balance
L/R Swap
Split Frequency
Lower/Upper Pan
Lower/Upper Width
3.8.33 MIDI Filter
The Midi F
provides an easy way to filter out unwanted MIDI data
ilter
at any point in the S
ound
to allow only parts of the note message stream through. Also, there are
dedicated filters for various MIDI event types. This MIDI plug-in can be
very handy when setting up advanced KORE 2 Performances, as you have
Controls the level of the left or right channel. At -1, only the left channel can be
heard; if +1, only the right channel can be heard.
If on, the left and right channels are swapped.
Controls the frequency at which the input signal is split into two bands.
Sets the stereo position of the lower or upper bands, respectively.
Controls the stereo width of the lower/upper bands, respectively. A value of 0
means centered, a value of 2 means far to the side.
M
. You can define key and velocity ranges
atrix
Function
Range
Unit
-1..+1
On/Off
50..12500
Hz
-1..+1
0..2
KORE 2 – 182

Advertisement

loading