Advertisement
32: Display
The Main Display shows Controller states, Pages, parameter names and
values, menus, lists and folder structures.
2.2 Driver Installation
KORE 2 is a tightly integrated system of software and hardware. Before
using the KORE 2 Controller, the hardware driver must be installed.
If you are unsure if the driver was correctly installed during the installation
procedure, you can add it manually: The driver installer is located in the
KORE 2 Program Folder on your computer.
Windows: Program Files / Native Instruments / KORE 2 /
Mac OS X: Applications / KORE 2 / Driver /
Driver Installation on Windows XP
►
Insert the KORE 2 Installation CD into the CD-ROM drive or locate
the driver setup in the KORE 2 program folder, Program Files / Native
Instruments / KORE 2 /.
►
Use the Windows Explorer to view the contents of the folder.
►
Start the installation by double-clicking Kore 2 Driver Setup.exe
►
The setup program will suggest C:\Program Files\Native Instruments\
KORE 2\ as the path for the destination folder. You may also choose
another folder if you wish.
►
During the installation you will be asked to attach the KORE 2
Controller. Please connect the KORE 2 Controller to a USB2 port on
your computer and follow the installation dialogs until installation is
finished.
!
!
Start the driver install
Start the driver install
process before connect-
process before connect-
ing the KORE 2 Controller to your
ing the KORE 2 Controller to your
computer.
computer.
!
!
For Windows XP, Service
For Windows XP, Service
Pack 2 is necessary for
Pack 2 is necessary for
the KORE 2 Controller to function
the KORE 2 Controller to function
properly. This Windows update pro-
properly. This Windows update pro-
vides support for USB 2.0.
vides support for USB 2.0.
KORE 2 – 15
Advertisement
