Advertisement
3.8.28 Rooms
This reverb unit specializes in room reflections. It is an efficient solution
when long reverberation isn't needed.
Label
Mix
Pre-Delay
Pre-Delay LR Offset
Reverberation Size
Reverberation Diffusion
Low Decay
High Decay
Stereo
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
Sets the time by which the incoming signal is delayed before it feeds into the
main reverb effect.
Sets the stereo position of the pre-delayed signal. Negative values decrease the
left channel delay time (as a percentage of the main delay time) while increasing
the right channel time. Positive values create the opposite effect.
Controls the size of the simulated reverb room, which equals
the decay time of the reflections.
Sets the amount of diffusion applied to the reverb signal. With lower values you'll
hear more discrete reflections in the overall sound.
Sets the decay time of the reverb signal's low and high frequency bands. A
higher value results in a longer reverb time for the respective frequency band.
Sets the effect signal's stereo width between mono (0%) and full stereo (100%).
Function
Range
Unit
0..100
%
0..50
ms
-100 ...
%
+100
1..100
0..100
%
0..100
%
-20..+20
dB
KORE 2 – 176
Advertisement
