Advertisement
Label
Controls the balance between the dry, unprocessed signal
Mix
(at the left) and the wet, processed signal (at the right).
Sets the time by which the incoming signal is delayed before
Pre-Delay Time
it is fed into the main reverb effect.
Sets the pre-delayed signal's stereo position. Negative values decrease the left
Pre-Delay LR Offset
channel delay time (as a percentage of the main delay time) while increasing the
right channel time. Positive values create the opposite effect.
Reverberation Size
Controls the size of the simulated reverb room, i.e., the reverb decay time.
Sets the amount of diffusion applied to the reverb signal. With lower values, the
Reverberation Diffusion
reverb sound becomes more echo-like.
Reverberation Early/
Controls the balance between the early reflections and the main reverb signal.
Late
Low Decay
Sets the decay time of the low/high frequency reverb signal bands. A high value
High Decay
results in a longer reverb time of the respective frequency band.
Low EQ
Sets the amount of cut or boost applied to the low/high frequency reverb signal
High EQ
bands with a shelving equalizer.
Function
Range
Unit
0..100
%
0..200
ms
-100 ...
%
+100
1..100
0..100
%
0..100
%
0..100
%
-20..+20
dB
KORE 2 – 179
Advertisement
