Advertisement
be adjusted (more poles creates a steeper response slope). Finally, you can
set the threshold at which the signal will be driven into saturation.
Label
Mix
Cutoff
Resonance Amount
Resonance Saturation
Level
Type (LP-BP-HP)
Sets the balance between the dry, unprocessed signal and the "wet" (filtered)
one.
Sets the filter's main frequency. According to the [Type] setting all frequencies
below, around or above this frequency are passed to the output, while others are
attenuated.
Sets the sharpness of the filter's response peak. At higher values the filter slope
gets steeper and the cutoff frequency becomes accentuated.
Sets the level where overdrive saturation will start to reduce the gain. At high
resonances this particularly affects the range around the cutoff frequency. At
a low saturation level the signal is saturated early while at high values higher
signal peaks are possible.
Crossfades between three operation modes. At low values the effect works as
low pass, filtering all frequencies above the cutoff frequency. At high values it
becomes a high pass with inverted characteristics. In between the effect acts as
a band pass, passing only frequencies around the cutoff frequency while attenu-
ating all others.
Function
Range
Unit
0..100
%
25..25000
Hz
0..100
%
-20..+20
dB
0..100
%
KORE 2 – 170
Advertisement
