Advertisement
They get populated automatically as you build your routing structures.
You cannot change them manually.
3.
u
P
are your flexible tools for setting up your own interface. By
Ser
ageS
default there are one or two pre-defined u
offering the most important parameters. They can be adjusted to your
liking. You can create new u
populate them with any parameter you want – no matter if it is is a
KORE 2 parameter or a plug-in parameter.
You can always see exactly which Page is being displayed. On the H
r
of the g
Controller there are two buttons.
ow
loBal
The u
P
button switches to the u
Ser
age
in focus and provides access to the P
which Page is displayed on the Controller. Of course you can always use
your KORE 2 Controller for navigation, too.
If you have focused a channel (by clicking its C
KORE 2 Controller), KORE 2 automatically switches to the corresponding
C
P
. The C
Hannel
age
Hannel
respective channel. If you set up new signal routings via the auxiliary sends,
the new controls will show up on the C
P
Ser
P
to expand your control and
Ser
ageS
P
of the component currently
Ser
age
S
menu. Here you can choose
age
eleCt
Hannel
P
assemble all Mixer controls of the
ageS
P
automatically.
Hannel
age
per KoreSound
ageS
eader
H
or via the
eader
KORE 2 – 87
Advertisement
