Native Instruments O Kore 2 Operation Manual page 34

3.2.1 Global Header
The topmost strip of controls is called the g
and you can think of it as the central control of KORE 2's interface. Its
main purpose is to change KORE 2's interface to match the situation at
hand and provide direct control of global parameters. The V
are your cockpit for switching between the various views of KORE 2.
Depending on the task – and on the available screen estate – you will
quickly find the best configuration. You can toggle between the e
with the S M
ound atrix
If the B is active, the S
rowSer
can be hidden to maximize the B
loBal
and the S M
ound anager
M or S
ound atrix
.
rowSer
H . It is always visible
eader
B
iew uttonS
dit
via the dedicated buttons.
M , respectively,
ound anager
% %
Use this interface flexibil- Use this interface flexibil-
ity to your advantage by ity to your advantage by
hiding the Edit Area when you want hiding the Edit Area when you want
to load and play sounds, only; or by to load and play sounds, only; or by
having only the Global Controller having only the Global Controller
and the Sound Matrix (quick focus- and the Sound Matrix (quick focus-
a
ing of sounds) visible when per- ing of sounds) visible when per-
rea
forming. forming.
KORE 2 – 3