Native Instruments O Kore 2 Operation Manual page 106

The settings shown here can also be found on the MIDI Tab of the channel.
Please see chapter 3..1 for details.
The key range can be set with the mouse by clicking on the l
values and dragging up or down.
Use the t parameter to transpose the channel up or down in
ranSPoSe
semitones.
The H /l V values define the lower and upper limits of a velocity
igH ow eloCity
window within which incoming MIDI notes will trigger the respective
channel. If, for example, the lower limit is set to 100, only notes with
a velocity higher or equal to 100 will trigger sound on this channel.
Furthermore, you can choose the Midi i
or Omni) for the currently selected KORE 2 channel. In Omni mode the
channel receives MIDI data on all MIDI channels.
The lower-right corner of the M
out of the display of the P
to zoom in or out of the keyboard. If a higher magnification is set, you can
scroll the display with the S
port and Midi C
nPut
e has controls to zoom in and
aPPing ditor
r . Click on the plus and minus symbols
iano oll
B below the P
Croll ar
/H n
ow igH ote
(1-16
Hannel
r .
iano oll
KORE 2 – 106