Download Print this page

Native Instruments O Kore 2 Operation Manual page 136

Advertisement

3.8.2 Auto Filter
The a
F
acts as a touch-controlled WahWah. This effect was very
uto
ilter
popular in Funk music of the 70ies, but can be used in a wide range of
applications from funky synthetic bass tracks to filtered drum loops.
Label
Sets the balance between the dry, unprocessed signal and the
Mix
"wet" (filtered) one.
Sets the filter's main frequency. According to the [Type] setting
Cutoff
all frequencies below, around or above this frequency are passed to
the output, while others are attenuated.
Resonance
Sets the sharpness of the filter's response peak. At higher values the filter slope becomes
Amount
steeper and the cutoff frequency more accentuated.
Sets the level where overdrive saturation will start to reduce the gain. At high resonances
Saturation
this particularly affects the range around the cutoff frequency. At a low saturation level the
Level
signal is saturated early while at high values higher signal peaks are possible.
Function
Range
Unit
0..100
%
25..10000
Hz
0..100
%
-20..+20
dB
KORE 2 – 136

Advertisement

loading