Native Instruments O Kore 2 Operation Manual page 186

whenever the loop length of the l
set up a list of l t
ooP raCKS
and by cycling through them you would get breaks in the downstream
sequencers.
The r button is self explanatory, as it toggles the playback of the
un
currently selected Track on or off.
The t P B
raCK rogreSS ar
The displayed length of the track is always as defined by the respective
l parameter of the track (see below).Beneath the P
ooP
find the t S menu.
raCK eleCt
It is automatically populated with the currently loaded tracks and displayed
in the t l . Click on the small triangle to open the menu and choose
raCK iSt
the desired track. When the Midi P
new Track. At which point this will happen depends on the setting of the
C menu (see below).
loCKSynC
Apart from choosing a Track from the menu you can also use the P
t / n t buttons to move through the list of tracks.
raCK ext raCK
The C menu has three different entries:
loCKSynC
►
None means that the Player will switch to the new Track immediately,
without syncing the switch time to the global or host clock.
►
When Beat is selected the Player will start on the next beat of the
global or host clock.
►
When Bar is selected, the Player will start playback on the first beat
of the next bar.
wraps. You could, for example,
ooP traCK
in a Midi P , that have different lengths
layer
shows the position in the currently played track.
is running, it will switch to the
layer
B you will
rogreSS ar
reViouS
KORE 2 – 186