Native Instruments O Kore 2 Operation Manual page 91

Controller ranges
For every Destination on the list you can define a minimum and a maximum
setting for the control range. This can also be done interactively during
Learn (see above).
To change the range grab one of the yellow range limits and move your
mouse horizontally. This will change the d
values. Also, you can click inside of the range to move both limits at the
same time.
There are more ways to do this:
►
Click with your mouse into the value fields and drag up or down.
►
Double-click on the value and type it in via the keyboard of your
computer.
An Example: If you have set d
M to 100, although the d
axiMuM
-100 to +200, you can only reach 0 and 100 with the extreme positions
of your Controller.
r
eStination ange
r M
eStination ange iniMuM
parameter has a range from
eStination
M and M
in ax
to 0 and the
KORE 2 – 91