Table of Contents
Advertisement
Cleaning CDs
Clean CDs by wiping from the center to the edge, not around in a circle, using
a product, such as a soft cloth, made especially for cleaning CDs.
Diskette drive
The diskette drive is not recognized
I
Restart your server.
I
Open your server case and make sure that the cables are connected
correctly to the diskette drive and the system board. The red-striped edge
of the data ribbon cable indicates Pin 1 and corresponds with Pin 1 on
the diskette drive (typically on the side farthest from the power supply
connection). If necessary, reverse one end of the cable so that the
red-striped edge of the data ribbon cable faces Pin 1 on the diskette drive.
Make sure that the pins are not bent or misaligned. For more information,
see "Installing a 5.25-inch drive" on page 48.
www.gateway.com
Troubleshooting
101
Advertisement
Table of Contents
