Closing The Server Case - Gateway 9210 User Manual

5
Swing the side panel away from the case.

Closing the server case

To close the server case:
1
For more stability, set the server on its side.
2
Make sure that all of the internal cables are arranged inside the case so they will not
be pinched when you close the case.
3
Align the side panel's front tabs into the case notches, then swing the side panel
toward the case until the release latches snap into place.
4
Set the case upright.
5
Reconnect the power cord and all other cables.
www.gateway.com 31