Closing The Server Case - Gateway E-9525R User Manual

CHAPTER 4: Installing Components

Closing the server case

Important
The hard drive carriers shown in these
illustrations may look different than the
actual hard drive carriers in your server.
32
To close the server case:
Make sure that all of the internal cables are arranged inside the case so
1
they will not be pinched when you close the case.
Place the top cover (1) on the server, then slide it forward until it clicks into
2
place.
Replace the screw (2) to hold the top cover in place.
3
Reconnect the power cord(s) and all other cables.
4
www.gateway.com