Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility
are not saved when you turn off the server, replace the CMOS battery with an
equivalent battery.
Warning
To replace the battery:
1
Print the appendix for
2
Open the BIOS Setup utility by following the instructions in
BIOS Setup utility" on page
3
Record the BIOS settings on your printout, then close the utility.
4
Turn off your server, then follow the instructions in
electricity discharge" on page
5
Follow the instructions in
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries following the manufacturer's instructions.
BIOS Settings
76.
27.
"Opening the server case" on page
www.gateway.com
Replacing the CMOS battery
in this guide.
"Preventing static
"Opening the
28.
71