Replacing The Cmos Battery - Gateway 995 User Manual

Chapter 4: Installing Components

Replacing the CMOS battery

If the server clock does not keep time or the settings in the BIOS Setup utility
are not saved when you turn off the server, replace the CMOS battery with an
equivalent battery.
Warning
To replace the battery:
1
Print the appendix for
2
Restart your server, then press F2 when the Gateway logo screen appears
during startup. The BIOS Setup utility opens.
3
Record the BIOS settings on your printout, then close the utility.
4
Turn off your server, then follow the instructions in
electricity discharge" on page
5
Remove the processor board. For instructions, see
board" on page
102
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of or recycle
used batteries by taking them to a hazardous waste facility.
Follow all local regulations for correct battery disposal.
BIOS Settings
36.
94.
www.gateway.com
in this guide.
"Preventing static
"Replacing the processor