Ethernet Tasks; Ports; Ports: Settings - GE Multinet 4 Instruction Manual

CHAPTER 4: SYSTEM ADMINISTRATION
4.4

Ethernet Tasks

4.4.1

Ports

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
The following subsections describe the tasks that you can perform using the screens of the
Ethernet Switching branch.
The Ports screens enable you to configure ports and to view port status and statistics.

4.4.1.1 Ports: Settings

This screen enables you to configure the system's Ethernet ports.
Table 4–28:: Ethernet: Ports: Settings describes the fields you can view and edit in the Ports:
Settings form.
Field Name
Port ID: Uniquely identifies a physical, labeled interface on the exterior
of the product chassis. The Port ID string should exactly match
the physical labeling scheme.
Port Name: A user-configurable name for the port. This may be any
arbitrary text string up to 16 printable ASCII characters. This
field is "Ethernet-X" by factory default.
FIGURE 4–28: Ethernet: Ports: Settings
Table 4–28: Ethernet: Ports: Settings
Field Value
SYSTEM ADMINISTRATION
4–45