Authentication; Authentication: Policies - GE Multinet 4 Instruction Manual

CHAPTER 4: SYSTEM ADMINISTRATION
4.2.7

Authentication

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
Field Name
Not In Time Windows:
Unknown Usernames:
Unknown Engine IDs:
Wrong Digests:
Decryption Errors:
The authentication screens enable you to set system-wide security policies, to add or
delete user accounts, and to maintain user account information.

4.2.7.1 Authentication: Policies

The Authentication "Policies" form enables you to change the number of failed login
attempts to allow before a user is locked out.
FIGURE 4–13: Administration: Authentication: Policies
The table below describes the parameters you can configure in configuring authentication
security policies.
Table 4–12: SNMP: Statistics
Field Value
The total number of packets received by the SNMP engine
which were dropped because they appeared outside of the
authoritative SNMP engine's window.
The total number of packets received by the SNMP engine
which were dropped because they referenced a user that was
not known to the SNMP engine.
The total number of packets received by the SNMP engine
which were dropped because they referenced an
snmpEngineID that was not known to the SNMP engine.
The total number of packets received by the SNMP engine
which were dropped because they didn't contain the expected
digest value.
The total number of packets received by the SNMP engine
which were dropped because they could not be decrypted.
SYSTEM ADMINISTRATION
4–19