Snmp: Management Stations - GE Multinet 4 Instruction Manual

CHAPTER 4: SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
Field Name
Engine Boots:
Engine Time:

4.2.6.2 SNMP: Management Stations

The "SNMP: Management Stations" screen enables you to configure SNMP management
stations.
FIGURE 4–9: Administration: SNMP: Management Stations
The table below describes the parameters you can view and configure in the "SNMP:
Management Stations" screen.
Table 4–9: SNMP: Management Stations
Field Name
IP Address: Enter the IP address of a management station that are allowed
to query the SNMP agent. Click Apply Settings to add this
address to the Existing Stations table.
You can specify up to four management stations.
Table 4–8: SNMP: Global Settings
Field Value
The number of times the system has booted since the current
engine ID was set.
The number of seconds elapsed since the engine ID was
changed or the system booted, whichever occurred most
recently.
Field Value
Add Station Form
SYSTEM ADMINISTRATION
4–11