Mounting Options - GE Multinet 4 Instruction Manual

CHAPTER 1: OVERVIEW
1.1.4

Mounting Options

For 19" rail mounting hardware
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
There are four mounting options for the Multinet4:
• 19" rack mount (see section 2.3.1.2 Mounting in a 19" Rail System - General2.3.1.2
Mounting in a 19" Rail System - General)
• 19" rack reverse mount (see section 2.3.1.4 Mounting in a 19" Rail System - Reverse
Mounting)
• Panel mount (see section 2.3.1.5 Mounting on a Panel)
• DIN rail mount (see section 2.3.1.6 Mounting in a DIN Rail System)
Each of these options requires specific accessory hardware. Each type of accessory
hardware mates up with a specific set of screw holes on the sides of the chassis, illustrated
in the figure below.
For DIN rail and panel mounting hardware
FIGURE 1–4: Side View
OVERVIEW
1–3