GE Multinet 4 Instruction Manual page 202

THE CLI AND PROTOCOL MONITOR
Command
set
show
5–26
Table 5–18: CLI web Commands
Synopsis
set mode http | sslonly
show
For more information see the description of web server security management in section
4.8.4: Web Server.
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
CHAPTER 5: THE CLI AND PROTOCOL MONITOR
Description
Specify whether the server will accept non-secure HTTP
requests:
• – Accept both non-secure HTTP (port 80)
http
requests and secure SSL (port 443)
requests.
• – Accept only secure requests.
sslonly
Display the current security setting of the embedded web
server.