Table of Contents
Advertisement
CHAPTER 4: SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
The table below describes the parameters you can configure in the RADIUS: Servers
screen.
Field Name
Add Server Form and Existing Servers Table
IP Address:
The IP Address of the RADIUS server to query.
UDP Port::
The UDP port used to send requests. Authentication servers use
UDP port 1812. Accounting servers use port 1813. It is not
recommended to use the legacy port 1645 where it conflicts
with "Datametrics" service.
Request Retry
The number of times the client will retry a request in the event a
Limit:
server is not responding or is slow to respond.
Request Timeout::
The time in seconds the client will wait for each retry attempt.
Shared Secret::
The plain text shared secret used to communicate with the
RADIUS server.
Role:
Defines the order in which servers are accessed. If the primary
is down, the system attempts to contact the secondary server.
Delete:
Set the Delete checkbox in a row in the Existing Servers table
and click Apply Settings to delete that server.
FIGURE 4–66: Security: RADIUS: Servers
Table 4–67: RADIUS: Servers
Field Value
SYSTEM ADMINISTRATION
4–105
Hide quick links:
Advertisement
Table of Contents
