Ssh - GE Multinet 4 Instruction Manual

CHAPTER 6: OPERATIONAL GUIDE
6.6

SSH

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
Multinet4 provides security for CLI transactions with Secure SHell (SSH) technology.
Typically a key has been generated at the factory, so that your Multinet4 device is
delivered with SSH enabled; that is, the SSH Server State value is "Running." If the SSH
Server State value is "No Key" you must run the keygen command in the CLI. Once a key
has been generated SSH can be enabled or disabled through the browser interface or
through the CLI.
OPERATIONAL GUIDE
6–23