Table of Contents
Advertisement
SYSTEM ADMINISTRATION
4.5.2
Terminal Server
4–76
Field Name
Breaks:
The number of times a break was detected in the middle of
receiving a character. A break is detected when an all-zero
character with no stop bit is received.
Parity Errors:
The number of times the calculated parity of a character did not
match the configured parity mode. (Note: character will be
dropped.)
Framing Errors:
The number of times a character without a valid stop bit was
detected.
Overruns:
The number of times a received character was dropped
because it could not be buffered.
Ports: Statistics Screen Controls
The Ports: Statistics screen includes the following controls for viewing, clearing, and
updating statistics:
Refresh Button – Click this button to update the statistics.
Clear Counters Button – Click this button to zero out all counters. Counting will begin
again and the "Last cleared" date and time will be refreshed.
The screens described in the following subsections enable you to configure and view your
TCP/IP connections.
4.5.2.1 Terminal Server: Channel Settings
This screen enables you to configure the terminal server channel settings. For more on
terminal server applications see section 7.1: What is a Terminal Server?
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
CHAPTER 4: SYSTEM ADMINISTRATION
Table 4–46: Ports: Statistics
Field Value
Hide quick links:
Advertisement
Table of Contents
