System Status - GE Multinet 4 Instruction Manual

CHAPTER 4: SYSTEM ADMINISTRATION
4.2.3

System Status

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
Field Name
System Contact:
System Description:
Upgrade State:
IP Address:
MAC Address:
Free Space (KB):
Uptime:
This screen enables you to view system status information.
FIGURE 4–2: Administration: System: Status
The table below describes the fields displayed in the System: Status screen.
Table 4–1: System Information
Field Value
Configurable MIB-II system contact of up to 256 printable
characters.
The system model number and current software version.
The current software upgrade state.
The system IP address. This may be changed from the 4.6.1
screen.
Settings
The System MAC Address. This address is defined at the
factory. You cannot change this address. All packets
sourced from the management and terminal server
functions use this MAC address as the Ethernet Source
Address (SA). The system will also respond to ARP requests
using this MAC address.
Number of KB free in the non-volatile file system.
The time elapsed since the last system boot.
SYSTEM ADMINISTRATION
4–3