Panasonic KX-TD500 User Manual page 94

3.1 User Programming Instructions
Before entering the user programming mode
Before entering the user programming mode, confirm that:
• Your telephone is on-hook, and
• No calls are on hold at your telephone.
Entering the user programming mode
To enter the User Programming mode:
Press PROGRAM +
• The display shows the Initial Message:
Note:
• If nothing is entered within five seconds after the PROGRAM button is pressed,
programming mode is canceled.
• During the programming mode, your extension is treated as a busy extension.
• Only one proprietary telephone can be in programming mode at any one time.
• The User Programming Password is not shown on the display for security reason.
The password can be changed by System Programming.
Programming References
• System Programming — Installation Manual, Section 4
4.10.4 Maintenance - System Parameters
+ + User Programming Password (default:1234)
— Password
User Programming
SYS-PGM NO?
User Programming
3-5