Panasonic KX-TD500 User Manual page 194

4.3 Station Features and Operation
• How many times does the IRNA destination ring ?
This is determined by System Programming (Section 4.2.4 System - System Timer,
"Call Forwarding — No Answer Time" in the Installation Manual).
Programming References
• System Programming — Installation Manual, Section 4
<To enable DISA feature>
4.1.6 Configuration - DISA Port Assignment
4.2.2 System - Numbering Plan
4.2.6 System - Trunk to Trunk Restriction
4.2.7 System - System Option
4.3.5 Group - OGM Group
4.4.1 Line - Trunk Line
4.5.8 Features - DISA/TIE User Code
<To set DISA timer values>
4.2.4 System - System Timer
<To enable the Intercept Routing feature>
4.2.4 System - System Timer
4.3.1 Group - Trunk Group
Feature References
Intercept Routing (
Outgoing Message (OGM) Record / Playback (4.4/Operator / Manager Service Features)
— (41) OGM Playback /Record
— (13) DISA Prolong Operation
— (14) Dialing " " in DISA CO-to-CO talking
— (17) Destination busy-DISA
— (21) Illegal Number -DISA
— FDN
— Tenant No.
— OGM Type
— Security Mode
— Destination of DISA single digit dialing
— Incoming Type
— Destination, Day/Night
— CPC Signal
— OUT Detection, Detection Time
— IN Detection, Detection Time
— Code
— COS
— CO-to-CO Line Call Duration Time (1-64 min.)
— DISA Prolong Time (0-7 min.)
— DISA Delayed Answer Time (0-6 rings)
— DISA Automated Attendant Time (1-5 s)
— DISA IRNA Time (5-240 s)
— Intercept Timer after OGM
— Intercept Destination, Day/Night
see Features Guide)
Station Features and Operation
D
4-79