Panasonic KX-TD500 User Manual page 85

2.2
For KX-T7431 and KX-T7433 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
7431/7433
Dial .
• The STORE indicator light turns off.
• The display shows the current status.
(If nothing is stored, "Not Stored" is displayed.)
<PT Display Example>
9-123-4567
CLR
• Up to 16 digits, consisting of 0 through 9,
or "]" : secret) and CONF (-:hyphen), can be stored.
• To store the telephone number of an outside party, the line access code (9 or 801
through 848) must be stored as the leading digit.
• To erase the entry, press the CLR (S2) button or TRANSFER button.
— CLR (S2) button: for KX-T7433 users
— TRANSFER button: for KX-T7431 users
• To store a name, press the NEXT (S3) button (KX-T7433) or MODE button (KX-
T7431) and go to step 4 in "To store a name" as described in the following procedure.
— To exit the Station Programming mode: Press [PROGRAM].
2-44
Station Programming
Station Programming
station speed dial no.
Enter a station speed dial
number (0 through 9).
(–Outside number, 123-4567,
is now programmed.)
NEXT
desired number
Enter the desired number
(extension number,
phone number, etc.).
• The STORE indicator lights.
• The display shows the initial
programming mode.
, #, FLASH, PAUSE, INTERCOM, ("["
AUTO DIAL
STORE
Press STORE.