Panasonic KX-TD500 User Manual page 230

4.3 Station Features and Operation
Having a conversation with the party
PT
(LCS)
Press the flashing LCS
(flexible button).
Conditions
• The LCS indicator shows the feature status as follows.
PT
Red (steady) .....................The Live Call Screening mode is on.
Off ...................................The Live Call Screening mode is off.
Flashing green slowly ......Live Call Screening is acting.**
Flashing green rapidly......Alarm tone is ringing in the Private mode.**
**
• The Two-Way Record indicator shows the feature status as follows.
PT
On.....................................Recording the conversation
Off ....................................Not recording
• During Keep Recording mode, if you want to stop recording the conversation, press the
PT
Two-Way Recording button.
• Call Waiting
PT
If the extension user is busy on a call when a caller begins to leave a message, a call
waiting tone is sent (if programmed beforehand). The extension user can put the
current call on hold before accessing LCS.
• LCS button/LCS Cancel button
PT
A flexible CO and DSS button can be assigned as an LCS/LCS Cancel button.
• LCS Password Clear
PT
To prevent unauthorized monitoring, a 3-digit password must be set by the extension
user. If the user forgets their password, it can be cleared by the Manager extension or
an Operator.
• Recording Mode
PT
Each extension can be programmed to either stop or continue recording the
conversation after intercepting the recording in order to talk with the caller.
SLT
• LCS by an SLT (only in the Private Mode)
An SLT which is connected with a PT in parallel, can also be used to monitor a
message being recorded. Be sure that Live Call Screening on the connected PT has
been activated.
or
Lift the handset or press
SP-PHONE/MONITOR.
The LCS button which is assigned on a DSS Console (except KX-T7440 and KX-T7441) will flash in red.
The LCS button which is assigned on the KX-T7440 or KX-T7441 will flash green slowly.
Station Features and Operation
L
4-115