Panasonic KX-TD500 User Manual page 100

3.2 User Programming
System Speed Dialing Number Set
Conditions
Feature References
• There is a maximum of 1000 speed dial numbers per tenant. However,
this can be changed by System programming. System supports a
maximum of 2000 speed dial numbers, being shared among up to 8
tenants. Each speed dial number has a maximum of 24 digits. The
valid characters are 0 through 9,
PAUSE, SECRET and – (hyphen) buttons.
– To store the flash signal, press FLASH.
Note : The stored flash will only be effective during an
established call.
(Refer to "External Feature Access" in the Features
Guide.)
– To store a hyphen, press the "–" button.
– To store a pause, press PAUSE.
(Refer to "Pause Insertion, Automatic" in the Features Guide.)
– To prevent displaying all or part of the number, press SECRET
before and after the confidential parts of the number, or your
entry is not stored. (Refer to "Secret Dialing" in the Features
Guide.)
• If you are storing an external number, enter the line access code
(default=9, 801 through 848) before the number. When dialing, a
pause is automatically inserted after the code.
• If you are storing an account code, enter the account code before the
line access code. (Refer to "Account Code Entry" in the Features
Guide.)
• It is possible to store a number consisting of 25 digits or more by
storing it in two speed dial numbers. The line access code should be
stored in the first speed dial number.
• To display parts of the number which have scrolled off the display,
press or .
• Program [002] "System Speed Dialing Name Set" is used to name the
speed dial numbers.
• CO line access code must be placed before placing secret dial code 'S'
or '[.'
System Speed Dialing (4.3/Station Features and Operation 4.5/Special
Display Features)
(contd.)
, and # keys, and the FLASH,
User Programming
001
3-11