Panasonic KX-TD500 User Manual page 126

4.3 Station Features and Operation
In "Option" mode
• You can enter any account code when needed. It is possible to record a calling or
called party's account code in the SMDR, during a conversation or within 15 seconds
after the other party hangs up.
• You can enter any account code during and after a call (after a CPC signal
detected).
General
• To clear and re-enter the account code, press " ."
• An account code can be up to 10 numeric digits (0 through 9). FLASH, PAUSE, etc.
are not allowed. After entering an account code, the delimiter "#" or "99" must be
entered.
• Memory Dialing
An account code can be stored into Memory Dialing ("One-Touch Dialing," "System
/Station Speed Dialing" ). The sequence to enter an account code into Memory Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
PT
• Pressing the Account button (flexible button) while entering an account code cancels
the entry.
SLT
• You cannot enter an account code during a call or while hearing a reorder tone.
SLT
• Flashing the switchhook while entering an account code cancels the entry.
• Account button
The Account button can be used instead of dialing the feature number. It can be
assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Account Button
• User Programming (Section 3)
[005] Flexible CO Button Assignment
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.2.3 System - Class of Service
4.4.2 Line - Extension Line
4.4.3 Line - DSS Console
— (36) Account Code
— Account Code Mode
— Flexible CO/PF Key Assignment
— Flexible DSS/PF Key Assignment
or
Station Features and Operation
A
is
* 3
4-11