Panasonic KX-TD500 User Manual page 236

4.3 Station Features and Operation
Checking and Selecting a message notification by the receiver
Display PT
If there is any message notification, the message waiting lamp
(MESSAGE indicator) light will be on.
When the telephone is idle and on-hook;
Press MESSAGE repeatedly until the desired message appears.
• The message notifications you received are shown on the display in the order
they were received.
<PT Display Example>
When Tony at extension 123 left a message notification:
123:Tony
Calling back the message notification sender
PT
Lift the handset or press
SP-PHONE/MONITOR.
SLT with Message Lamp
Lift the handset or press
SP-PHONE/MONITOR.
*One of the dial tones. Refer to the "Tone List" in the Appendix (Section 6).
MESSAGE
Dial tone 4.*
• If there are more than one message
notification left on your extension, you
can choose the desired message sender
(display PT only).
Dial tone 4.*
MESSAGE
Press MESSAGE. Talk.
• The message notification is
cleared after the conversation.
7 0 2
Dial 702.
• The message notification is
cleared after the conversation.
Station Features and Operation
M
Talk.
4-121