Panasonic KX-TD500 User Manual page 106

3.2 User Programming
Flexible CO Button Assignment
Programming
Display PT
0 0
Dial 005.
<PT Display>
005 FLEXIBLE CO
• To program another CO button of the same extension port:
Repeat these steps
CO
Press CO which is changed
to another button.
• The display shows the contents
pre-assigned to the button.
<PT Display Example>
CO-10101
• To program another extension port:
SELECT
Press SELECT.
<To end:>
END
Press END.
5
Press NEXT.
<PT Display>
EXT NO?
button code
Enter a button code.
extension no.
Enter an extension number
(3 or 4 digits).
NEXT
• To enter the lowest extension
number, you can also press
NEXT.
<PT Display Example>
parameters
Enter parameters, if required.
• To change the parameter, press CLEAR
and enter the new parameter.
005
(contd.)
extension no.
Enter an extension number
(3 or 4 digits).
PT-PGM Mode
STORE
Press STORE.
Repeat these steps.
Go to "Repeat these steps"
above.
User Programming
3-17