Panasonic KX-TD500 User Manual page 214

4.3 Station Features and Operation
Conditions
• Flash Time
The flash time must be assigned as required by the Centrex, host PBX or CO line.
PT
• FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or
disconnecting the current call.
This is determined by System Programming (Section 4, System - System Option, "(3)
FLASH button operation while CO talking," "(4) Flash button operation when "Don't
release the trunk" is selected at #3" in the Installation Manual).
• Memory Dialing
PT
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or
One-Touch Dialing works as External Feature Access, not as Flash (Disconnect Signal).
SLT
• This feature does not function, if an SLT has a call on Consultation Hold.
Programming References
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.2.7 System - System Option
4.3.1 Group - Trunk Group
Feature References
Flash
Host PBX Access (
— (38) External Feature Access
— (3) FLASH button operation while CO talking
— (4) FLASH button operation when "Don't release the trunk" is selected
at #3
— Flash Time
— Max. Dial No. after EFA Signal
see Features Guide)
Station Features and Operation
E
4-99