External Modem Control - Panasonic KX-TD500 User Manual

E

External Modem Control

Allows you to control the external modem, connected to the RS-232C Port 1, by sending
a pre-assigned AT Command (for enabling Automatic Answer, etc.).
Activating an AT Command to the RS-232C Port 1
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• An AT Command can only be programmed by Serial Interface/remote programming
software.
• For more information about the AT Command, please refer to the modem instructions.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming References
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.10.1 Maintenance - External Modem 1/2, 2/2
Feature References
External Modem Control (
KX-T7235 Display Features – System Feature Access Menu (4.5/Special Display Features)
KX-T7431 / KX-T7433 / KX-T7436 Display Features – System Feature Access Menu
(4.5/Special Display Features)
4-100
Station Features and Operation
4.3 Station Features and Operation
7 9 1
Dial 791.
<PT Display Example>
MODEM Command X
— (61) Modem Control
see Features Guide)
AT Command no.
Confirmation tone
Enter the AT Command
number (1 through 5)
-1: for Command 1
-2: for Command 2
-3: for Command 3
-4: for Command 4
-5: for Command 5
AT Command number
Hang up or press
SP-PHONE/MONITOR.