Panasonic KX-TD500 User Manual page 301

T
Conditions
• System Time
The system clock must be set before the alarm is set.
• If an alarm time has not been set, the display shows the following:
Alarm Not Stored
• Timed Reminder message can be recorded by the Manager or an Operator. ("Outgoing
Message (OGM)"). When the alarm is heard, you can hear the message by going off-
hook, if it has been recorded. You hear an intermittent tone (dial tone 3) instead of the
message in the following cases:
a) A DISA Card is not equipped.
b) All DISA ports are busy or OUS (Out-of-Service).
c) The Timed Reminder message has not been stored.
• If other extension user calls your extension when the alarm is sounding, he or she will
hear a busy tone.
• If you receive an incoming CO call during the alarm, the ringing starts after the alarm
stops.
• If you are having a conversation at the time the alarm is set to sound, the alarm starts
after the conversation.
• Station Message Detail Recording (SMDR)
SMDR automatically records the detailed Timed Reminder information (date, time,
extension number, start/no answer). It is programmable by System Programming to
print out when the Timed Reminder starts and the alarm is not answered.
• Setting a new time clears the preset time.
• Timed Reminder Ringing Time
The alarm continues for a specified period of time (default: 30 seconds).
This period of time can be changed by System Programming.
• Hardware Requirements for a wake-up call
To utilize a wake-up call, DISA card (KX-T96191) is required.
• OGM Recording
To utilize a wake-up call, set OGM Type of an OGM Group to "Wakeup."
OGM Recording can be done only by the Manager or an Operator.
• What if a wake-up message is not recorded?
An alarm tone is heard instead of a wake-up message.
• The number of extension users who can set this feature is not limited. However, the
number of extension users who can hear the wake-up message at a time is limited to a
maximum of 56 per DISA card.
If the 57th or later extension user goes off-hook to hear the wake-up message,
he or she will hear the alarm tone instead of the wake-up message.
• Distinctive Dial Tone
Distinctive Dial Tone is sent to the user on the extension with this feature when the
extension user goes off-hook.
4-186
Station Features and Operation
4.3 Station Features and Operation