Preferred Line Assignment - Outgoing; No Line Preference - Outgoing - Panasonic KX-TD500 User Manual

2.2
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the
following three line preferences:
1.) No Line Preference
2.) Idle Line Preference
3.) Prime Line Preference (INTERCOM) (— default)
Follow the programming procedure according to your selection.
<Note>
If "Idle Line Preference," "No Line Preference" or "Prime Line Preference (SCO, GCO
or LCO)" is selected, it is not possible to access any PT features after going off-hook.
To access these PT features, press the INTERCOM (ICM type PT) or PDN (DN type
PT) button before or after going off-hook.
No Line Preference — Outgoing
When you go off-hook to make a call, you are not connected to any line. You must
choose the line.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
• The display shows the current
status.
— To exit the Station Programming mode: Press [PROGRAM].
Station Programming
1
Dial 1.
<PT Display Example>
Pref. Out:No
(Assignment)
AUTO DIAL
1
STORE
Press STORE.
Dial 1.
• The STORE indicator lights.
• The display shows the initial
programming mode.
Station Programming
2-37