Secondary Directory Number (Sdn)Button - Panasonic KX-TD500 User Manual

2.2
Secondary Directory Number (SDN) Button
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
(CO)
Press the desired Flexible
(CO) button you wish to
assign as an SDN button.
<PT Display Example>
SDN—
<PT Display Example>
SDN—xxxx
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• An SDN button should have its associated PDN button of another extension.
This assignment is available for extensions on which at least one PDN button is
already assigned (DN type PT). Otherwise, the SDN button does not function.
• Up to three different SDN buttons can be assigned to a PT
Station Programming
7 5
Enter the extension number
Dial 75.
(3 or 4 digits) of the owner
extension.
CLR
(-xxxx:extension number)
CLR
extension no. of the
owner extension
• The STORE indicator lights.
• The display shows the initial
(Assignment)
AUTO DIAL
STORE
Press STORE.
programming mode.
Station Programming
2-23