Line Access Buttons - Panasonic KX-TD500 User Manual

1.1

Line Access Buttons

The following three types of CO buttons can be used to seize a CO line when making
a CO call.
• Single-CO (S-CO) button
• Group-CO (G-CO) button
• Loop-CO (L-CO) button
Conditions
• A flexible CO button can be assigned as a Line Access Button (S-CO, G-CO or L-CO)
in either System/Station Programming. Once a flexible CO button is assigned as a Line
Access Button, it provides the line status condition by lighting patterns and green/red
indication. Please refer to "LED Indication" in this section.
• You can set the G-CO and L-CO buttons on one telephone. Incoming and outgoing
calls on the line are shown on the button in the following priority.
S-CO > G-CO > L-CO
Single-CO (S-CO) button
An S-CO button is a CO line access button. This allows you to access a specific CO line
by pressing an S-CO button. An incoming CO call can be directed to an S-CO button.
Conditions
• The same CO line cannot be assigned to more than one S-CO button on a PT.
• It is possible to assign the same CO line to an S-CO button, a G-CO button and an
L-CO button respectively.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Single-CO (S-CO) Button
(System Programming — "Flexible CO Button Assignment" can be used for this assignment.)
Feature References
Flexible Buttons (Section 1.1/Configuration)
Outward Dialing, Trunk Access — Individual
Configuration
DPT Overview
1-17