Panasonic KX-TD500 User Manual page 192

Digital super hybrid system
Hide thumbs Also See for KX-TD500:
Table of Contents

Advertisement

4.3
Station Features and Operation
Re-try
From Outside Telephone
It is possible (by System Programming) to dial a different number during a conversation
with an outside party or while hearing a ringback, reorder, or busy tone.
Press
.
• You hear a dial tone.
• If you dial "
dial tone, or after the DISA outgoing message, the call
will be disconnected.
Conditions
Calling an extension
• You can choose Non Security, Trunk Security or All Security mode. In All Security
mode, the caller must enter a pre-assigned DISA user code to make intercom calls.
• If the DISA call is not answered within a specified period of time (DISA IRNA Time:
60 seconds (default)), the system redirects it to the pre-determined IRNA destination.
If IRNA destination is not programmed, the DISA call continues to ring at the first
destination extension.
Calling an outgoing CO line
• You can choose Non Security, Trunk Security or All Security mode. In Trunk Security
mode, the caller must enter a pre-assigned DISA user code to make outside calls. In All
Security mode, the caller must enter a pre-assigned DISA user code to make both CO
and intercom calls.
General
• If the caller does not dial any digits during and after the playback of DISA outgoing
message, the system will direct him or her to the pre-determined destination (Intercept
Routing). "Intercept Routing" is activated 5 seconds after (default) or immediately after
the playback depending on System Programming.
• DISA Delayed Answer Time
A DISA call is answered after a ringback tone is returned to the caller after the "DISA
Delayed Answer Time" expires. The caller can dial while hearing the OGM message.
• DISA User Code
The KX-TD500 System can store up to 32 programmable DISA user codes with a COS
level for each. Each code should be unique.
• DISA User Code Entry Failure
If the DISA caller fails to enter the valid DISA user code three times consecutively, the
call will be disconnected.
"while hearing a DISA outgoing message,
• You must dial a line access code (9 or 801 through 848)
when calling an outside party.
desired no.
Station Features and Operation
D
4-77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Td500

Table of Contents