Panasonic KX-TD500 User Manual page 243

N
Conditions
• Class of Service
Class of Service programming determines the extensions that can perform this feature.
• By System Programming, you can select either automatic Day/Night mode switching or
manual Day/Night mode switching. In the automatic case, the default start time for Day
mode is 9:00 a.m. every day and the default start time for Night mode is 5:00 p.m.
every night.
• Any extension user (with display PT) can confirm the current mode, Day or Night.
• The following programming items can be assigned in a different way between day
mode and night mode. Refer to Section 4 "System Programming" in the Installation
Manual for detailed information on these programming items.
4.2.3 System - Class of Service
4.3.1 Group - Trunk Group
4.3.2 Group - Extension Group
4.4.1 Line - Trunk Line
4.4.4 Line - Doorphone
4.9.1 DID - Dial Registration
Programming References
• System Programming — Installation Manual, Section 4
4.2.1 System - Tenant
4.2.2 System - Numbering Plan
4.2.3 System - Class of Service
Feature References
Direct In Lines (DIL) (
Doorphone Call
Intercept Routing (
Toll Restriction (
Trunk Connection Assignment — Outgoing (
4-128
Station Features and Operation
4.3 Station Features and Operation
— TRS Level, Day/Night
— Trunk Group Setting, Day/Night
— Intercept Destination, Day/Night
— Overflow Setting
Destination, Day/Night
— Destination, Day/Night
— Destination, Day/Night
— Destination, Day/Night
— DAY/NIGHT Switching Mode
— Day 1/2, Night 1/2
— (51) Night Mode, Set/Cancel
— Switching Day/Night Mode
see Features Guide)
see Features Guide)
see Features Guide)
see Features Guide)