Panasonic KX-TD500 User Manual page 6

Terms used in the Descriptions
Feature Numbers
A feature number is an access code for various functions when programming or
executing features using proprietary or single line telephones connected to the system.
You can access available features by dialing the corresponding feature number (and
additional number, if required).
There are two types of feature numbers as follows:
• Flexible feature number
• Fixed feature number
While fixed feature numbers cannot be changed, flexible feature numbers can be
changed. Refer to the Installation Manual for details. In this manual, the default
numbers are used to describe each operation and illustration. Use the new
programmed number if you have changed a flexible feature number. The lists of fixed
numbers and default flexible feature numbers are shown in the Appendix (Section 6).
If you use a dial pulse (DP) type single line telephone (SLT);
It is not possible to access features that have " " or "#" in their feature numbers.
Illustration
All illustrations of DPTs used in the User Manual are KX-T7235's.
Tones
Various tone types, such as Confirmation tone, Dial tone, Call Waiting tone, etc. are
explained in the Appendix (Section 6).
Display
The display examples are in each operation step, if required. The display information
list is in the Appendix for your convenience.
Programming References
The related and required programming titles are noted for your reference.
System Programming should be done with PC. Station Programming is individual
programming at your own proprietary telephone (PT). You can customize the
extension to your needs using any type of proprietary telephone.
Feature References
The related feature titles are noted for your reference.
6
Introduction