Panasonic KX-TD500 User Manual page 368

4.5
Conditions
• This feature is available for KX-T7230, KX-T7235, KX-T7433 and KX-T7436 only.
• If a Direct In Lines (DIL) 1 : 1 call is forwarded by Call Forwarding, the data will be
logged at both the forwarding and forwarded extension.
• You can lock the display so that incoming call information is not shown on the display.
• If you modify the displayed telephone number, the new number will be memorized.
• With the KX-T7433, KX-T7436 or KX-T7235, you can set or cancel overwriting the
call log using the System Feature Access Menu (on the Fifth Display).
Programming References
• Station Programming (Section 2.2)
Initial Display Selection
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.4.1 Line - Trunk Line
4.4.2 Line - Extension Line
4.5.11 Features - Caller ID Registration
Feature References
Call Log Incoming, Log Lock (4.5/Special Display Features)
KX-T7235 Display Features – System Feature Access Menu (4.5/Special Display Features)
KX-T7431 / KX-T7433 / KX-T7436 Display Features – System Feature Access Menu
(4.5/Special Display Features)
* The Caller ID service provides you with a caller's information, such as his/her name and telephone
number, on the CO line assigned to receive Caller ID service calls. Refer to "Caller ID Service" in the
Features Guide for further information.
Special Display Features
— (55) Call Log Incoming, Overwrite Mode
— Name
—Display Mode of Incoming Call
— Name
— Number
Station Features and Operation
4-253