2.2
PDN/SDN Button Delayed Ringing Assignment
Allows you to assign a delayed ringing function on the PDN/SDN buttons.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
(PDN)
Press PDN or SDN
you wish to assign a delayed
ringing function.
<PT Display Example>
Immediate Ring
<PT Display Example>
1-ring Delay
• If you want to change the delayed ringing type, enter another
type number again.
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• If more than one PDN button is assigned on a PT, Delayed Ringing can be set to the
first PDN button (assigned to the CO 01) only. This Delayed Ringing setting applies
to all PDN buttons on the same PT.
Station Programming
(SDN)
7
or
Dial 76.
6
delayed ringing type no.
Enter the delayed ringing type
number (0 through 4).
-0: Immediate Ring
-1: 1-ring Delay
-2: 3-ring Delay
-3: 6-ring Delay
-4: No Ring
AUTO DIAL
STORE
Press STORE.
• The STORE indicator lights.
• The display shows the initial
programming mode.
Station Programming
2-33