Emergency Call - Panasonic KX-TD500 User Manual

E

Emergency Call

Allows you to dial out a pre-assigned emergency number after seizing a CO line
regardless of the restrictions imposed on your extension. Up to 10 emergency dial
numbers can be stored in the system.
Dialing
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• The emergency number "911" is already stored at the factory. System Programming is
required to store other emergency numbers.
• An emergency call is allowed even in the following cases;
— in Account Code – Verified (All Calls, Toll Restriction Override) mode
— in any toll restriction level
— in Electronic Station Lockout / Remote Station Lock
• If your KX-TD500 System is connected to a host PBX as a behind PBX, you must dial
the host PBX line access code after dialing the line access code and it must be included
as the first digit of the emergency number.
Programming References
• System Programming — Installation Manual, Section 4
4.5.3 Features - Emergency Dial Code
Feature References
None
4-90
Station Features and Operation
4.3 Station Features and Operation
line access code
Dial the line access code
(9 or 801 through 848).
• You may press a CO button instead.
emergency no.
Dial tone
Dial the emergency number.