Panasonic KX-TD500 User Manual page 118

4.1
Operation Step Box
In this section, operations for extension users are described using the following
Operation Step Box.
Applicable telephone:
Both PT and SLT users
can follow the operation
steps below.
PT and SLT
Wait for an answer
2
and talk.
Dial 2.
Notes: • If your telephone is not noted in the operating step box (ex. only "PT" is noted), this
means your telephone does not have the ability to execute that feature.
• If your telephone has the ability to perform several operations for one feature, you can
select the method according to your needs.
• In this manual, the default feature numbers are used to describe each operation and
illustration. Use the new programmed numbers if default feature numbers are changed
by System Programming.
• For proprietary telephone operations, all button illustrations are based on the model
KX-T7235.
Description of Symbols Used
In this section, many symbols are used. Most symbols do not need a description, but
some symbols do. They are as follows.
Lift the handset, or press the SP-
PHONE or MONITOR button.
(Off-hook)
Replace the handset, or press the
SP-PHONE or MONITOR
button. (On-hook)
Before Operating
7230 / 7235 / 7433 / 7436
BSS
S1 S2
Press BSS (S1).
Wait for an answer
S3
and talk.
Flash the switchhook on a single
line telephone.
Tones which vary depending on
the condition (Refer to "Tone
List" in Section 6).
Station Features and Operation
Applicable telephone:
KX-T7230, KX-T7235,
KX-T7433 and KX-
T7436 users can execute
not only the button
operation but also the
display operation below.
Operation steps
4-3