Panasonic KX-TD500 User Manual page 350

4.4 Operator / Manager Service Features
Checking the time setting
Display PT
Lift the handset or press
SP-PHONE.
<PT Display Example>
• If "10:10" has been set, the display shows;
Conditions
• The system clock must be set correctly beforehand.
• There is no limit to the number of the extensions who can set the Timed Reminder at
the same time.
• Only the latest time setting is valid at the extension whether it was set by the extension user
(Timed Reminder) or by the Manager extension or an Operator (Timed Reminder, Remote).
• Station Message Detail Recording (SMDR)
SMDR automatically records the detailed Timed Reminder information (date, time,
extension number, start/no answer). It is programmable to be printed out when the
Timed Reminder starts and the alarm is not answered. Refer to "Station Message
Detail Recording (SMDR)" in the Features Guide for further information.
Programming References
• User Programming (Section 3)
[005] Date and Time Set
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.10.2 Maintenance - SMDR
4.10.5 Maintenance - System Time
Feature References
Timed Reminder (Wake-Up Call)
7
Dial 7 2.
Alarm 10:10AM
or
Alarm 10:10AM*
— (57) Timed Reminder, Remote
— Print out No Answer of Timed Reminder information
— System Time
2
extension no.
Dial the desired extension
number (3 or 4 digits) or press
DSS on which you have
set the Timed Reminder.
only one time
daily
Station Features and Operation
(DSS)
or
Hang up or press
SP-PHONE.
<PT Display Example>
• If time setting is not stored:
Alarm Not Stored
T
4-235