Panasonic KX-TD500 User Manual page 107

005
3.2
Canceling
Display PT
0 0
Dial 005.
<PT Display>
005 FLEXIBLE CO
CO
Press CO which is changed
to another button.
• The display shows the contents
pre-assigned to the button.
<PT Display Example>
CO-10101
Conditions
Feature References
3-18
User Programming
User Programming
Flexible CO Button Assignment
5
Press NEXT.
<PT Display>
EXT NO?
2
Dial 2.
• The number of the CO buttons available for each PT varies depending
on the telephone type. (Refer to "Buttons on Proprietary Telephones."
in the Features Guide) To program 24 CO buttons, use the proprietary
telephone with 24 CO buttons, such as KX-T7230.
• If you press the same CO button again at step 5, you can select a
desired ringer frequency for the CO button from eight types of ring
tones. When you enter the tone type number (1 through 8), you will
hear the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO,
Group-CO, Loop-CO, PDN or SDN.
Features Guide,
Button, Flexible
NEXT
• To enter the lowest extension
number, you can also press
NEXT.
<PT Display>
STORE
Press STORE.
Buttons on Proprietary Telephones
(contd.)
extension no.
Enter an extension number
(3 or 4 digits).
PT-PGM Mode
END
Press END.