Panasonic KX-TD500 User Manual page 420

5.2
Conditions
• DSS buttons can be changed to any of the following feature buttons by Station, User or
System Programming:
a) Account Button
b) Another DSS Button (Every DSS button can be assigned to another extension number.)
c) Answer Button
d) Conference (CONF) Button
e) FWD/DND Button
f) Group-CO (G-CO) Button
g) Live Call Screening (LCS) Button
h) Live Call Screening (LCS) Cancel Button
i) Message Waiting (MESSAGE) Button
j) One-Touch Dialing Button
k) Release Button
l) SAVE Button
m) Single-CO (S-CO) Button
n) Two-Way Record Button
o) Two-Way Transfer Button
p) Voice Mail (VM) Transfer Button
q) Tone Through Button
• PF buttons can be changed to any of the following feature buttons by Station, User or
System Programming:
a) Account Button
b) Answer Button
c) Conference (CONF) Button
d) FWD/DND Button
e) One-Touch Dialing Button
f) Release Button
g) SAVE Button
• When the STORE button is pressed after programming, you will hear beep tones as follows.
— One beep : The entry is changed from one that was stored previously.
— Two beeps : The entry is the same as on stored previously.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment
• System Programming — Installation Manual, Section 4
4.4.3 Line - DSS Console
5-24
DSS Console Features
DSS Console Features
†
†
— Paired Extension
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
†
†